Auroom Baia Traditional Indoor Sauna

Complete Specifications & System Overview

  • Product: Auroom Baia Glass Indoor Sauna
  • Model: Baia Glass
  • Sauna Type: Traditional indoor sauna cabin
  • Recommended Capacity: One to two people
  • Primary Material: Thermo-aspen
  • Installation Type: Prefabricated modular cabin
  • Intended Use: Residential indoor installation
  • Heater: Selected separately unless specifically listed on the approved invoice
  • Controls: Determined by the selected heater and control package

MANUFACTURER

  • Manufacturer: Auroom OÜ
  • Country of Manufacture: Estonia
  • Manufacturer Specialization: Prefabricated indoor and outdoor sauna cabins constructed with premium thermally modified timber

The standard Baia Glass cabin configuration generally includes:

  • Eight prefabricated wall elements
  • Five base elements
  • Four structural corner posts
  • Four finishing corner mouldings
  • Two ceiling elements
  • Two fully clad exterior side-wall panels
  • Bench support structure
  • Ergonomic wave-shaped upper bench
  • Coordinated backrest
  • Backrest mounting components
  • Integrated LED backrest lighting
  • Light shade or diffuser
  • Thermo-aspen bench grids
  • Thermo-aspen floor grid
  • Reversible door frame
  • Clear 8 mm tempered-glass door
  • Premium metal-and-wood door handle
  • Metal door hinges
  • Coordinated heater guard
  • Interior and exterior finishing mouldings
  • Required cabin assembly hardware

The heater, controls, sauna stones, electrical components, and accessories are included only when specifically identified on the client’s approved estimate and invoice.

Manufacturer Nominal Dimensions

  • Exterior Width: Approximately 64.2 inches / 1,630 mm
  • Exterior Depth: Approximately 64.2 inches / 1,630 mm
  • Exterior Height: Approximately 80.7 inches / 2,050 mm

North American Planning Dimensions

Some North American planning documents list an assembled allowance of approximately:

  • Width: 64 inches
  • Depth: 66 inches
  • Height: 82 inches

Interior Dimensions

  • Interior Width: Approximately 58 inches / 1,470 mm
  • Interior Depth: Approximately 58 inches / 1,470 mm
  • Interior Height: Approximately 78 inches / 1,980 mm

Additional Planning Information

  • Recommended Capacity: One to two people
  • Approximate Cabin Weight: 992 pounds / 450 kilograms
  • Approximate Shipping Weight: 1,150 pounds
  • Approximate Shipping Dimensions: 48 × 91 × 50 inches

Published measurements can vary by market, production revision, and selected package. Final installation and clearance decisions must follow the approved technical drawings supplied for the client’s exact cabin.

  • Contemporary compact profile
  • Horizontal thermo-aspen wall cladding
  • Coordinated wood finish across the visible exterior side panels
  • Clear glass entrance
  • Minimal exterior detailing
  • Premium metal-and-wood door hardware
  • Designed to integrate with modern residential interiors
  • One-level seating arrangement
  • Ergonomic wave-shaped bench
  • Comfortable seating for one or two users
  • Curved profile designed to support a more relaxed seated position
  • Coordinated backrest with integrated lighting
  • Bench and floor grids constructed from thermo-aspen
  • Heater placement coordinated with the selected cabin layout
  • Heater guard included with the cabin components

The compact single-bench layout prioritizes comfortable seating and usable floor space rather than adding a narrow secondary bench.

  • Thermo-aspen interior wall cladding
  • Thermo-aspen exterior cladding on the finished side panels
  • Thermo-aspen bench, backrest, heater guard, and floor grid
  • Prefabricated modular wall and ceiling elements
  • Factory-prepared structural connections
  • Horizontal interior and exterior wood profiles
  • Coordinated finishing mouldings
  • Metal door hinges and premium handle hardware
  • Components prepared for efficient on-site assembly

Thermo-aspen is modified using controlled heat and steam, improving the wood’s dimensional stability and reducing its tendency to absorb moisture. The process also deepens the wood’s tone without relying on chemical wood preservatives. Its smooth texture and low splintering tendency make it particularly suitable for benches, backrests, and other surfaces that come into contact with the body.

  • Interior and exterior wood elements are factory-treated with sauna wax
  • Wax helps reduce moisture penetration and surface marking
  • The finish supports easier routine cleaning
  • Only sauna-compatible maintenance products should be used
  • Abrasive cleaners, household varnishes, and conventional furniture coatings should not be applied
  • Clear tempered safety glass
  • Glass Thickness: 8 mm
  • Approximate Door Width: 24 inches
  • Reversible installation for left- or right-hand opening
  • Premium metal-and-wood handle
  • Metal hinge assembly
  • Glass front maintains visual connection with the surrounding room

Tempered glass must be handled carefully during assembly and must never be rested directly on concrete, tile, stone, or another hard surface.

The Baia Glass is designed for use with a traditional electric sauna heater and sauna stones. The base cabin does not include a heater unless one is specifically listed on the client’s approved estimate and invoice.

Auroom documentation lists different heater ranges according to market and configuration:

  • Some manufacturer materials identify 3.5 or 4.5 kW heater options
  • Other current product materials identify 4.5 or 6.0 kW options
  • North American configurations commonly use an appropriately selected 6.0 kW heater because of the cabin’s glass area and local electrical standards

The final heater must be sized using the cabin volume, glass area, installation conditions, required safety clearances, and the heater manufacturer’s instructions.

  • Sauna stones are determined by the selected heater
  • Only stones approved for the installed heater should be used
  • Stones must be washed, inspected, and arranged according to the heater manufacturer’s instructions
  • Improperly packed stones can restrict airflow and reduce heater life
  • Stones should be inspected and rearranged periodically
  • Broken or heavily deteriorated stones should be replaced
  • Designed for traditional high-temperature sauna bathing
  • Expected operating temperature is determined by the installed heater and controls
  • Typical traditional sauna temperatures may range from approximately 150°F to 195°F
  • Heat-up time varies according to ambient temperature, ventilation, heater output, electrical supply, and door usage
  • Water may be applied to properly heated sauna stones when permitted by the heater manufacturer
  • The glass area must be considered when calculating effective heating capacity

Electrical requirements depend on the final heater, controller, and lighting package.

A typical North American installation may require:

  • Dedicated 240-volt hardwired heater circuit
  • Dedicated two-pole circuit breaker
  • Copper conductors sized for the heater’s nameplate load
  • Required heater control or power unit connections
  • Separate lighting power supply when specified
  • Installation by a qualified licensed electrician
  • Compliance with local electrical codes and the heater manufacturer’s instructions

Breaker size, wire gauge, disconnect requirements, control wiring, and conductor temperature ratings must be confirmed from the final heater and controller documentation. Extension cords and plug adapters must not be used for the sauna heater.

The cabin itself does not include inherent Wi-Fi or app control. Available functionality depends entirely on the selected heater and controller.

Compatible packages may provide:

  • Digital temperature control
  • Adjustable session duration
  • Delayed-start scheduling
  • Wi-Fi connectivity
  • Mobile application access
  • Remote status monitoring
  • Lighting control
  • Safety notifications

Remote-start capability is subject to the selected equipment, required safety devices, local regulations, and manufacturer installation requirements.

  • Integrated LED lighting positioned behind the backrest
  • Indirect illumination designed to highlight the thermo-aspen interior
  • Lighting control can vary by supplied package
  • Manufacturer configurations may use an infrared sensor switch
  • Other packages may include a dedicated remote or compatible controller
  • Final switching and power-supply requirements must follow the supplied lighting package

Chromotherapy is not listed as a standard Baia Glass cabin feature. Colored or adjustable lighting should only be represented as included when specified on the approved invoice.

  • Cabin designed with passive ventilation provisions
  • Air inlet and exhaust placement must remain unobstructed
  • The surrounding installation room must have adequate ventilation
  • Vent placement must be coordinated with the selected heater
  • Mechanical ventilation is not a standard cabin feature
  • Any powered ventilation must be designed and installed separately

Proper ventilation supports even heating, comfortable air movement, wood drying, and depend
  • Indoor installation only
  • Requires a flat, level, stable, and load-bearing floor
  • Suitable finished surfaces commonly include tile, sealed concrete, or another heat- and moisture-resistant material
  • Carpet is not suitable beneath the sauna
  • The room must provide adequate ceiling height and installation access
  • Required electrical services should be planned before assembly
  • The cabin must not cover drains, vents, access panels, or required building systems
  • Confirm that the completed cabin and shipping components can pass through all doors, hallways, stairs, and elevators

The supplied floor grid is an interior walking surface and does not replace a properly prepared structural floor.

Before delivery, confirm:

  • Final shipping address
  • Delivery-access restrictions
  • Doorway and hallway dimensions
  • Stair and elevator access
  • Receiving and storage location
  • Availability of required personnel or equipment
  • Protection from weather and construction activity
  • Space for unpacking and organizing cabin components

The shipment should be inspected at delivery. Visible damage or missing packages should be photographed and documented before the delivery receipt is signed whenever possible.

  • Prefabricated modular construction
  • Manufacturer-estimated cabin assembly time is approximately four to six hours for two experienced people
  • Installation time does not include site preparation, electrical work, heater commissioning, or corrective construction
  • Components must be unpacked, inventoried, and acclimated according to supplied instructions
  • Wall, base, ceiling, door, bench, and finishing components must be assembled in the prescribed sequence
  • The glass door requires careful two-person handling
  • Heater installation must follow the heater manufacturer’s clearance requirements
  • Electrical work must be completed by a qualified licensed electrician
  • Final installation must comply with applicable building and electrical codes

Professional assembly is recommended because glass alignment, structural leveling, ventilation, and heater clearances directly affect safe operation.

  • Maintain all heater clearances specified by the heater manufacturer
  • Do not block ventilation openings
  • Do not place combustible materials against the heater
  • Do not install unapproved electrical equipment inside the cabin
  • Keep towels and accessories away from the heater
  • Confirm that the heater guard does not interfere with required clearances
  • Never operate the heater without properly installed sauna stones when stones are required
  • Inspect the cabin before using any remote-start feature

Auroom products are covered by the manufacturer’s applicable limited warranty. Warranty duration and coverage can vary according to purchaser classification, market, component, and distributor.

Warranty service generally requires:

  • Proof of purchase
  • Product and component identification
  • Installation according to manufacturer instructions
  • Electrical work completed in accordance with applicable codes
  • Proper use and maintenance
  • Prompt documentation of freight damage or manufacturing concerns

The heater, controls, lighting components, and accessories may carry separate warranties from their respective manufacturers. The written warranty supplied with the final order governs all coverage.

  • Sit or lie on clean sauna towels to reduce moisture and body-oil transfer
  • Allow the cabin to ventilate and dry after every use
  • Wipe benches and high-contact surfaces with a soft damp cloth
  • Use only cleaners approved for sauna wood
  • Avoid soaking the timber
  • Do not pressure-wash the interior
  • Avoid chlorine, bleach, abrasive cleaners, and conventional household chemicals
  • Inspect the door, hinges, handle, fasteners, and bench supports regularly
  • Keep ventilation openings free of dust and obstructions
  • Inspect and rearrange sauna stones periodically
  • Replace deteriorated stones when necessary
  • Refresh the protective sauna-wax finish only with compatible products and according to manufacturer guidance